OSADL QA Farm on Real-time of Mainline Linux
About - Hardware - CPUs - Benchmarks - Graphics - Benchmarks - Kernels - Boards/Distros - Latency monitoring - Latency plots - System data - Profiles - Compare - Awards
Profile of system in rack #f, slot #6 (as of Thu Nov 21, 2024 at 03:44:13)
|
Rack #0/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #1/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #2/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #3/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #4/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #5/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #6/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #7/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #8/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #9/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #a/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #b/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #c/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #d/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #e/#0 #1 #2 #3 #4 #5 #6 #7 #8 - Rack #f/#0 #1 #2 #3 #4 #5 #6 #7 #8 Next |
Name
rackfslot6.osadl.orgPurpose
DevelopmentVendor/Board
n.a./n.a.Distribution
Debian GNU/Linux 12 (bookworm)Kernel
5.10.19-rt32-00004-g2f47fd8f897f #5 SMP PREEMPT_RT Mon Mar 1 00:01:31 CET 2021 unknownKernel command line
console=ttyPS0,115200 clocksource=ttc_clocksource ip=192.168.114.142 root=/dev/nfs ro nfsroot=192.168.114.171:/srv/nfs/can-dut init=/sbin/initBuildtool
arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1Builder
pi@bareeCommand to generate latency plot histogram data
cyclictest -l100000000 -m -Sp99 -i200 -h400 -qDisplay most recent latency plot - Display long-term latency plot
Uptime/boot time
187 days, up since Fri, 17 May 24 21:22:58 +0200 (1715973778)CPU info 
Processor: 0
model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 666.66 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0Processor: 1
model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 666.66 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0 Hardware : Xilinx Zynq Platform Revision : 0003 Serial : 0000000000000000
CPU scaling
Specified clock frequency: 667 MHzDefault scaling setting:
CPU0: ondemand from 333 to 666 MHz CPU1: ondemand from 333 to 666 MHz
Sleep states
CPU 0 (WFI): enabled CPU 1 (WFI): enabledState 1
CPU 0 (RAM_SR): enabled CPU 1 (RAM_SR): enabled
Interrupts
Timer resolution
cpu: 0 clock 0: .resolution: 1 nsecs clock 1: .resolution: 1 nsecs clock 2: .resolution: 1 nsecs clock 3: .resolution: 1 nsecs clock 4: .resolution: 1 nsecs clock 5: .resolution: 1 nsecs clock 6: .resolution: 1 nsecs clock 7: .resolution: 1 nsecs cpu: 1 clock 0: .resolution: 1 nsecs clock 1: .resolution: 1 nsecs clock 2: .resolution: 1 nsecs clock 3: .resolution: 1 nsecs clock 4: .resolution: 1 nsecs clock 5: .resolution: 1 nsecs clock 6: .resolution: 1 nsecs clock 7: .resolution: 1 nsecs
Vulnerable to Y2038
Clock source
ttc_clocksource
Trace clock
localLazy preemption
noRAM
Network
Interfaces
can0: flags=128<NOARP> mtu can1: flags=128<NOARP> mtu eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu lo: flags=73<UP,LOOPBACK,RUNNING> mtu sit0: flags=128<NOARP> mtu
Topology
rfswitch/port #6 (Test system #6)DMI
# dmidecode 3.4 # No SMBIOS nor DMI entry point found, sorry.
Kernel configuration
(Not configured when building the kernel)
