Subject: tpm_tis: fix stall after iowrite*()s From: Haris Okanovic <haris.okanovic@ni.com> Date: Tue Aug 15 15:13:08 2017 -0500 From: Haris Okanovic <haris.okanovic@ni.com> ioread8() operations to TPM MMIO addresses can stall the cpu when immediately following a sequence of iowrite*()'s to the same region. For example, cyclitest measures ~400us latency spikes when a non-RT usermode application communicates with an SPI-based TPM chip (Intel Atom E3940 system, PREEMPT_RT kernel). The spikes are caused by a stalling ioread8() operation following a sequence of 30+ iowrite8()s to the same address. I believe this happens because the write sequence is buffered (in cpu or somewhere along the bus), and gets flushed on the first LOAD instruction (ioread*()) that follows. The enclosed change appears to fix this issue: read the TPM chip's access register (status code) after every iowrite*() operation to amortize the cost of flushing data to chip across multiple instructions. Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- drivers/char/tpm/tpm_tis.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) --- @ drivers/char/tpm/tpm_tis.c:53 @ static inline struct tpm_tis_tcg_phy *to return container_of(data, struct tpm_tis_tcg_phy, priv); } +#ifdef CONFIG_PREEMPT_RT +/* + * Flushes previous write operations to chip so that a subsequent + * ioread*()s won't stall a cpu. + */ +static inline void tpm_tis_flush(void __iomem *iobase) +{ + ioread8(iobase + TPM_ACCESS(0)); +} +#else +#define tpm_tis_flush(iobase) do { } while (0) +#endif + +static inline void tpm_tis_iowrite8(u8 b, void __iomem *iobase, u32 addr) +{ + iowrite8(b, iobase + addr); + tpm_tis_flush(iobase); +} + +static inline void tpm_tis_iowrite32(u32 b, void __iomem *iobase, u32 addr) +{ + iowrite32(b, iobase + addr); + tpm_tis_flush(iobase); +} + static int interrupts = -1; module_param(interrupts, int, 0444); MODULE_PARM_DESC(interrupts, "Enable interrupts"); @ drivers/char/tpm/tpm_tis.c:197 @ static int tpm_tcg_write_bytes(struct tp struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data); while (len--) - iowrite8(*value++, phy->iobase + addr); + tpm_tis_iowrite8(*value++, phy->iobase, addr); return 0; } @ drivers/char/tpm/tpm_tis.c:224 @ static int tpm_tcg_write32(struct tpm_ti { struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data); - iowrite32(value, phy->iobase + addr); + tpm_tis_iowrite32(value, phy->iobase, addr); return 0; }