From 29520edff135b0f294663b1439988c52878c7f94 Mon Sep 17 00:00:00 2001 From: Balaji T K <balajitk@ti.com> Date: Fri, 27 Sep 2013 17:05:09 +0530 Subject: [PATCH 44/58] ARM: dts: am335x-bone-common: correct mux mode for cmd line Set pinmux_emmc_pins mux mode for cmd line to MODE2 in order to detect eMMC on BBB and BBW + eMMC cape. Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index b3e6fcf..e3f27ec 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -160,7 +160,7 @@ emmc_pins: pinmux_emmc_pins { pinctrl-single,pins = < 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ - 0x84 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_csn2.mmc1_cmd */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ -- 1.8.4.rc3