From a8dd4d0444cbc25f2dfcf1835d00879f6a0f1bbf Mon Sep 17 00:00:00 2001
From: "Philip, Avinash" <avinashphilip@ti.com>
Date: Mon, 16 Jul 2012 14:59:41 +0530
Subject: [PATCH 16/51] pwm_backlight: Add device tree support for Low
 Threshold Brightness

Low Threshold Brightness should be configured to have a linear relation
in brightness scale. This patch adds device tree support for low
threshold brightness as optional one for pwm_backlight.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
---
 .../bindings/video/backlight/pwm-backlight.txt     |   21 ++++++++++++++++++++
 drivers/video/backlight/pwm_bl.c                   |    5 +++++
 2 files changed, 26 insertions(+)

@ Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt:17 @ Required properties:
 Optional properties:
   - pwm-names: a list of names for the PWM devices specified in the
                "pwms" property (see PWM binding[0])
+  - low_threshold_brightness: brightness threshold low level. (get linear
+		 scales in brightness in low end of brightness levels)
 
 [0]: Documentation/devicetree/bindings/pwm/pwm.txt
 
@ Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt:31 @ Example:
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
+
+Example for brightness_threshold_level:
+
+	backlight {
+		compatible	= "pwm-backlight";
+		pwms = <&pwm 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		low_threshold_brightness = <50>;
+	};
+};
+Note:
+Low threshold support is required to have linear brightness scale from
+0 to max. For some panels, backlight absent on low end of brightness
+scale. So support for Low Threshold been required. So that the scale of
+brightness changed from Low Threshold to Max in scales defined in
+brightness-levels. In this example 20% maximum brightness scale should
+be required to turn on panel backlight.
@ drivers/video/backlight/pwm_bl.c:139 @ static int pwm_backlight_parse_dt(struct device *dev,
 
 		data->dft_brightness = value;
 		data->max_brightness--;
+
+		ret = of_property_read_u32(node, "low_threshold_brightness",
+					   &value);
+		if (!ret)
+			data->lth_brightness = value;
 	}
 
 	/*
-- 
1.7.10.4