From 4aeb50369c1099d844b1e7409b0f8bfde7c27b40 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Thu, 14 Sep 2023 20:44:21 +0206 Subject: [PATCH 090/204] serial: stm32: Use port lock wrappers When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-65-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- drivers/tty/serial/stm32-usart.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) Index: linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c =================================================================== @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:538 @ static void stm32_usart_rx_dma_complete( unsigned int size; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); size = stm32_usart_receive_chars(port, false); uart_unlock_and_check_sysrq_irqrestore(port, flags); if (size) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:644 @ static void stm32_usart_tx_dma_complete( stm32_usart_tx_dma_terminate(stm32port); /* Let's see if we have pending data to send */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); stm32_usart_transmit_chars(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static void stm32_usart_tx_interrupt_enable(struct uart_port *port) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:895 @ static irqreturn_t stm32_usart_interrupt if (!stm32_port->throttled) { if (((sr & USART_SR_RXNE) && !stm32_usart_rx_dma_started(stm32_port)) || ((sr & USART_SR_ERR_MASK) && stm32_usart_rx_dma_started(stm32_port))) { - spin_lock(&port->lock); + uart_port_lock(port); size = stm32_usart_receive_chars(port, false); uart_unlock_and_check_sysrq(port); if (size) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:905 @ static irqreturn_t stm32_usart_interrupt } if ((sr & USART_SR_TXE) && !(stm32_port->tx_ch)) { - spin_lock(&port->lock); + uart_port_lock(port); stm32_usart_transmit_chars(port); - spin_unlock(&port->lock); + uart_port_unlock(port); ret = IRQ_HANDLED; } /* Receiver timeout irq for DMA RX */ if (stm32_usart_rx_dma_started(stm32_port) && !stm32_port->throttled) { - spin_lock(&port->lock); + uart_port_lock(port); size = stm32_usart_receive_chars(port, false); uart_unlock_and_check_sysrq(port); if (size) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1002 @ static void stm32_usart_throttle(struct const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* * Pause DMA transfer, so the RX data gets queued into the FIFO. @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1015 @ static void stm32_usart_throttle(struct stm32_usart_clr_bits(port, ofs->cr3, stm32_port->cr3_irq); stm32_port->throttled = true; - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } /* Unthrottle the remote, the input buffer can now accept data. */ @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1025 @ static void stm32_usart_unthrottle(struc const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); stm32_usart_set_bits(port, ofs->cr1, stm32_port->cr1_irq); if (stm32_port->cr3_irq) stm32_usart_set_bits(port, ofs->cr3, stm32_port->cr3_irq); @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1039 @ static void stm32_usart_unthrottle(struc if (stm32_port->rx_ch) stm32_usart_rx_dma_start_or_resume(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } /* Receive stop */ @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1168 @ static void stm32_usart_set_termios(stru baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8); - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); ret = readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, isr, @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1359 @ static void stm32_usart_set_termios(stru writel_relaxed(cr1, port->membase + ofs->cr1); stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); /* Handle modem control interrupts */ if (UART_ENABLE_MS(port, termios->c_cflag)) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1409 @ static void stm32_usart_pm(struct uart_p pm_runtime_get_sync(port->dev); break; case UART_PM_STATE_OFF: - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); pm_runtime_put_sync(port->dev); break; } @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1894 @ static void stm32_usart_console_write(st int locked = 1; if (oops_in_progress) - locked = spin_trylock_irqsave(&port->lock, flags); + locked = uart_port_trylock_irqsave(port, &flags); else - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* Save and disable interrupts, enable the transmitter */ old_cr1 = readl_relaxed(port->membase + ofs->cr1); @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:1910 @ static void stm32_usart_console_write(st writel_relaxed(old_cr1, port->membase + ofs->cr1); if (locked) - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static int stm32_usart_console_setup(struct console *co, char *options) @ linux-6.6.58-rt45/drivers/tty/serial/stm32-usart.c:2045 @ static int __maybe_unused stm32_usart_se * low-power mode. */ if (stm32_port->rx_ch) { - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* Poll data from DMA RX buffer if any */ if (!stm32_usart_rx_dma_pause(stm32_port)) size += stm32_usart_receive_chars(port, true);