From 0c9ad577b8d8c7d37ac27b6c25e3ab9d1ba2c5a7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Thu, 14 Sep 2023 20:43:49 +0206 Subject: [PATCH 058/204] serial: liteuart: Use port lock wrappers When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Gabriel Somlo <gsomlo@gmail.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-33-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- drivers/tty/serial/liteuart.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) Index: linux-6.6.58-rt45/drivers/tty/serial/liteuart.c =================================================================== @ linux-6.6.58-rt45/drivers/tty/serial/liteuart.c:142 @ static irqreturn_t liteuart_interrupt(in * if polling, the context would be "in_serving_softirq", so use * irq[save|restore] spin_lock variants to cover all possibilities */ - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg; if (isr & EV_RX) liteuart_rx_chars(port); if (isr & EV_TX) liteuart_tx_chars(port); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); return IRQ_RETVAL(isr); } @ linux-6.6.58-rt45/drivers/tty/serial/liteuart.c:198 @ static int liteuart_startup(struct uart_ } } - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* only enabling rx irqs during startup */ liteuart_update_irq_reg(port, true, EV_RX); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (!port->irq) { timer_setup(&uart->timer, liteuart_timer, 0); @ linux-6.6.58-rt45/drivers/tty/serial/liteuart.c:216 @ static void liteuart_shutdown(struct uar struct liteuart_port *uart = to_liteuart_port(port); unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); liteuart_update_irq_reg(port, false, EV_RX | EV_TX); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); if (port->irq) free_irq(port->irq, port); @ linux-6.6.58-rt45/drivers/tty/serial/liteuart.c:232 @ static void liteuart_set_termios(struct unsigned int baud; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* update baudrate */ baud = uart_get_baud_rate(port, new, old, 0, 460800); uart_update_timeout(port, new->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static const char *liteuart_type(struct uart_port *port) @ linux-6.6.58-rt45/drivers/tty/serial/liteuart.c:385 @ static void liteuart_console_write(struc uart = (struct liteuart_port *)xa_load(&liteuart_array, co->index); port = &uart->port; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); uart_console_write(port, s, count, liteuart_putchar); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); } static int liteuart_console_setup(struct console *co, char *options)