From d83665fc56a55d435b912df3edcc442adecd2c95 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner <tglx@linutronix.de> Date: Thu, 14 Sep 2023 20:43:44 +0206 Subject: [PATCH 053/204] serial: fsl_lpuart: Use port lock wrappers When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-28-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- drivers/tty/serial/fsl_lpuart.c | 88 ++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 44 deletions(-) Index: linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c =================================================================== @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:535 @ static void lpuart_dma_tx_complete(void struct dma_chan *chan = sport->dma_tx_chan; unsigned long flags; - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); if (!sport->dma_tx_in_progress) { - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); return; } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:546 @ static void lpuart_dma_tx_complete(void uart_xmit_advance(&sport->port, sport->dma_tx_bytes); sport->dma_tx_in_progress = false; - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&sport->port); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:556 @ static void lpuart_dma_tx_complete(void return; } - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); if (!lpuart_stopped_or_empty(&sport->port)) lpuart_dma_tx(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static dma_addr_t lpuart_dma_datareg_addr(struct lpuart_port *sport) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:654 @ static int lpuart_poll_init(struct uart_ sport->port.fifosize = 0; - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); /* Disable Rx & Tx */ writeb(0, sport->port.membase + UARTCR2); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:678 @ static int lpuart_poll_init(struct uart_ /* Enable Rx and Tx */ writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); return 0; } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:706 @ static int lpuart32_poll_init(struct uar sport->port.fifosize = 0; - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); /* Disable Rx & Tx */ lpuart32_write(&sport->port, 0, UARTCTRL); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:727 @ static int lpuart32_poll_init(struct uar /* Enable Rx and Tx */ lpuart32_write(&sport->port, UARTCTRL_RE | UARTCTRL_TE, UARTCTRL); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); return 0; } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:882 @ static unsigned int lpuart32_tx_empty(st static void lpuart_txint(struct lpuart_port *sport) { - spin_lock(&sport->port.lock); + uart_port_lock(&sport->port); lpuart_transmit_buffer(sport); - spin_unlock(&sport->port.lock); + uart_port_unlock(&sport->port); } static void lpuart_rxint(struct lpuart_port *sport) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:893 @ static void lpuart_rxint(struct lpuart_p struct tty_port *port = &sport->port.state->port; unsigned char rx, sr; - spin_lock(&sport->port.lock); + uart_port_lock(&sport->port); while (!(readb(sport->port.membase + UARTSFIFO) & UARTSFIFO_RXEMPT)) { flg = TTY_NORMAL; @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:959 @ out: static void lpuart32_txint(struct lpuart_port *sport) { - spin_lock(&sport->port.lock); + uart_port_lock(&sport->port); lpuart32_transmit_buffer(sport); - spin_unlock(&sport->port.lock); + uart_port_unlock(&sport->port); } static void lpuart32_rxint(struct lpuart_port *sport) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:971 @ static void lpuart32_rxint(struct lpuart unsigned long rx, sr; bool is_break; - spin_lock(&sport->port.lock); + uart_port_lock(&sport->port); while (!(lpuart32_read(&sport->port, UARTFIFO) & UARTFIFO_RXEMPT)) { flg = TTY_NORMAL; @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1173 @ static void lpuart_copy_rx_to_tty(struct async_tx_ack(sport->dma_rx_desc); - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); dmastat = dmaengine_tx_status(chan, sport->dma_rx_cookie, &state); if (dmastat == DMA_ERROR) { dev_err(sport->port.dev, "Rx DMA transfer failed!\n"); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); return; } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1247 @ exit: dma_sync_sg_for_device(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); tty_flip_buffer_push(port); if (!sport->dma_idle_int) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1338 @ static void lpuart_timer_func(struct tim mod_timer(&sport->lpuart_timer, jiffies + sport->dma_rx_timeout); - if (spin_trylock_irqsave(&sport->port.lock, flags)) { + if (uart_port_trylock_irqsave(&sport->port, &flags)) { sport->last_residue = state.residue; - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1805 @ static void lpuart_hw_setup(struct lpuar { unsigned long flags; - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); lpuart_setup_watermark_enable(sport); lpuart_rx_dma_startup(sport); lpuart_tx_dma_startup(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static int lpuart_startup(struct uart_port *port) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1862 @ static void lpuart32_hw_setup(struct lpu { unsigned long flags; - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); lpuart32_hw_disable(sport); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1872 @ static void lpuart32_hw_setup(struct lpu lpuart32_setup_watermark_enable(sport); lpuart32_configure(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static int lpuart32_startup(struct uart_port *port) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1935 @ static void lpuart_shutdown(struct uart_ unsigned char temp; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* disable Rx/Tx and interrupts */ temp = readb(port->membase + UARTCR2); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1943 @ static void lpuart_shutdown(struct uart_ UARTCR2_TIE | UARTCR2_TCIE | UARTCR2_RIE); writeb(temp, port->membase + UARTCR2); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); lpuart_dma_shutdown(sport); } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1955 @ static void lpuart32_shutdown(struct uar unsigned long temp; unsigned long flags; - spin_lock_irqsave(&port->lock, flags); + uart_port_lock_irqsave(port, &flags); /* clear status */ temp = lpuart32_read(&sport->port, UARTSTAT); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:1972 @ static void lpuart32_shutdown(struct uar UARTCTRL_TIE | UARTCTRL_TCIE | UARTCTRL_RIE | UARTCTRL_SBK); lpuart32_write(port, temp, UARTCTRL); - spin_unlock_irqrestore(&port->lock, flags); + uart_port_unlock_irqrestore(port, flags); lpuart_dma_shutdown(sport); } @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2072 @ lpuart_set_termios(struct uart_port *por if (old && sport->lpuart_dma_rx_use) lpuart_dma_rx_free(&sport->port); - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); sport->port.read_status_mask = 0; if (termios->c_iflag & INPCK) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2127 @ lpuart_set_termios(struct uart_port *por sport->lpuart_dma_rx_use = false; } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static void __lpuart32_serial_setbrg(struct uart_port *port, @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2307 @ lpuart32_set_termios(struct uart_port *p if (old && sport->lpuart_dma_rx_use) lpuart_dma_rx_free(&sport->port); - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); sport->port.read_status_mask = 0; if (termios->c_iflag & INPCK) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2365 @ lpuart32_set_termios(struct uart_port *p sport->lpuart_dma_rx_use = false; } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static const char *lpuart_type(struct uart_port *port) @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2483 @ lpuart_console_write(struct console *co, int locked = 1; if (oops_in_progress) - locked = spin_trylock_irqsave(&sport->port.lock, flags); + locked = uart_port_trylock_irqsave(&sport->port, &flags); else - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); /* first save CR2 and then disable interrupts */ cr2 = old_cr2 = readb(sport->port.membase + UARTCR2); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2501 @ lpuart_console_write(struct console *co, writeb(old_cr2, sport->port.membase + UARTCR2); if (locked) - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } static void @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2513 @ lpuart32_console_write(struct console *c int locked = 1; if (oops_in_progress) - locked = spin_trylock_irqsave(&sport->port.lock, flags); + locked = uart_port_trylock_irqsave(&sport->port, &flags); else - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); /* first save CR2 and then disable interrupts */ cr = old_cr = lpuart32_read(&sport->port, UARTCTRL); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:2531 @ lpuart32_console_write(struct console *c lpuart32_write(&sport->port, old_cr, UARTCTRL); if (locked) - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } /* @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:3096 @ static int lpuart_suspend(struct device uart_suspend_port(&lpuart_reg, &sport->port); if (lpuart_uport_is_active(sport)) { - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); if (lpuart_is_32(sport)) { /* disable Rx/Tx and interrupts */ temp = lpuart32_read(&sport->port, UARTCTRL); @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:3108 @ static int lpuart_suspend(struct device temp &= ~(UARTCR2_TE | UARTCR2_TIE | UARTCR2_TCIE); writeb(temp, sport->port.membase + UARTCR2); } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); if (sport->lpuart_dma_rx_use) { /* @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:3121 @ static int lpuart_suspend(struct device lpuart_dma_rx_free(&sport->port); /* Disable Rx DMA to use UART port as wakeup source */ - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); if (lpuart_is_32(sport)) { temp = lpuart32_read(&sport->port, UARTBAUD); lpuart32_write(&sport->port, temp & ~UARTBAUD_RDMAE, @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:3130 @ static int lpuart_suspend(struct device writeb(readb(sport->port.membase + UARTCR5) & ~UARTCR5_RDMAS, sport->port.membase + UARTCR5); } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); } if (sport->lpuart_dma_tx_use) { - spin_lock_irqsave(&sport->port.lock, flags); + uart_port_lock_irqsave(&sport->port, &flags); if (lpuart_is_32(sport)) { temp = lpuart32_read(&sport->port, UARTBAUD); temp &= ~UARTBAUD_TDMAE; @ linux-6.6.58-rt45/drivers/tty/serial/fsl_lpuart.c:3144 @ static int lpuart_suspend(struct device temp &= ~UARTCR5_TDMAS; writeb(temp, sport->port.membase + UARTCR5); } - spin_unlock_irqrestore(&sport->port.lock, flags); + uart_port_unlock_irqrestore(&sport->port, flags); sport->dma_tx_in_progress = false; dmaengine_terminate_sync(sport->dma_tx_chan); }