Subject: Save the current patchset in the kernel From: Carsten Emde <C.Emde@osadl.org> Date: Wed, 9 Jan 2013 08:44:49 +0100 In the good old days when only a small number of computer boards were released per year and mainline kernel support was available for most of them, it was an excellent idea to save the current kernel configuration in the binary kernel. This made it possible to reproduce a kernel from the vanilla kernel sources at any time. In modern times, however, when myriads of (mostly ARM based) computer boards are inundating the market every year most of which require a large patchset that often is difficult to obtain, the saved config file is nearly useless. (If a patchset cannot be obtained with reasonable effort, the board vendor, of course, is in breach of the Linux kernel license.) This patch now provides a mechanism to store the current patchset in the binary kernel in a very similar way as it is done with the config file. To reproduce the source tree that was used for a particular kernel, use the command sequence: tar zxf /proc/patchset.tar.gz baseversion major=`cut -d. -f1 baseversion` urldir=http://www.kernel.org/pub/linux/kernel/v$major.x dir=linux-`cat baseversion` rm -f baseversion archive=$dir.tar.xz wget $urldir/$archive tar Jxf $archive cd $dir tar zxf /proc/patchset.tar.gz quilt push -a zcat /proc/config.gz >.config BTW: Making the kernel sources available through this mechanism does not entirely fulfill the disclosure obligations of the GPL, but it certainly is much better than making available nothing. Signed-off-by: Carsten Emde <C.Emde@osadl.org> --- init/Kconfig | 41 ++++++++++++++++++ kernel/Makefile | 20 +++++++++ kernel/patchset.c | 100 +++++++++++++++++++++++++++++++++++++++++++++ scripts/extract-ikpatchset | 68 ++++++++++++++++++++++++++++++ 4 files changed, 229 insertions(+) Index: linux-5.10.59-rt51/init/Kconfig =================================================================== --- linux-5.10.59-rt51.orig/init/Kconfig +++ linux-5.10.59-rt51/init/Kconfig @@ -674,6 +674,47 @@ config IKCONFIG_PROC This option enables access to the kernel configuration file through /proc/config.gz. +config IKPATCHSET + tristate "Kernel patchset support" + depends on PROC_FS + select IKCONFIG + select BUILD_BIN2C + help + This option enables the complete patchset, if any, to be saved + in the kernel. The patchset can be extracted from a kernel image + file using the script scripts/extract-ikpatchset. It is also + possible to extract the patchset from a running kernel via + /proc/patchset.tar.gz. The vanilla kernel version on which the + patchset is based is available in the file "baseversion" of the + archive. Thus, the following command sequence will create a + patched kernel source tree from which an identical kernel can be + rebuilt (assumes that IKPATCHSET_PROC is also configured): + tar zxf /proc/patchset.tar.gz baseversion + major=`cut -d. -f1 baseversion` + urldir=http://www.kernel.org/pub/linux/kernel/v$major.x + dir=linux-`cat baseversion` + rm -f baseversion + archive=$dir.tar.xz + wget $urldir/$archive + tar Jxf $archive + cd $dir + tar zxf /proc/patchset.tar.gz + quilt push -a + zcat /proc/config.gz >.config + +config IKPATCHSET_PROC + bool "Enable access to patchset.tar.gz through /proc/patchset.tar.gz" + depends on IKPATCHSET && PROC_FS + select IKCONFIG_PROC + help + This option enables access to the patchset used when building the + current kernel through /proc/patchset.tar.gz. + + Select this if you are using an official mainline kernel with + off-tree patches (quilt queue) and you want to enable your users to + rebuilt a functionally identical kernel without requiring any more + information. + config IKHEADERS tristate "Enable kernel headers through /sys/kernel/kheaders.tar.xz" depends on SYSFS Index: linux-5.10.59-rt51/kernel/Makefile =================================================================== --- linux-5.10.59-rt51.orig/kernel/Makefile +++ linux-5.10.59-rt51/kernel/Makefile @@ -77,6 +77,7 @@ obj-$(CONFIG_UTS_NS) += utsname.o obj-$(CONFIG_USER_NS) += user_namespace.o obj-$(CONFIG_PID_NS) += pid_namespace.o obj-$(CONFIG_IKCONFIG) += configs.o +obj-$(CONFIG_IKPATCHSET) += patchset.o obj-$(CONFIG_IKHEADERS) += kheaders.o obj-$(CONFIG_SMP) += stop_machine.o obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o @@ -143,6 +144,25 @@ filechk_cat = cat $< $(obj)/config_data: $(KCONFIG_CONFIG) FORCE $(call filechk,cat) +$(obj)/patchset.o: $(obj)/patchset_data.h + +# patchset_data.h contains the patchset as gzipped tar archive +# The archive can be extracted from /proc/patchset.tar.gz +baseversion: include/generated/utsrelease.h + @cut -d" " -f 3 include/generated/utsrelease.h | tr -d '"' | cut -d- -f1 >$@ +targets += patchset_data.gz +$(obj)/patchset_data.gz: $(wildcard patches/*) patches/series baseversion + @mv patches/series patches/series.bak + @quilt applied | sed s,^patches/,, >patches/series.raw + @mv patches/series.raw patches/series + @tar zcf $@ `quilt applied | sed '/^patches\//! { s,\(.*\),patches/\1, }'` patches/series baseversion + @mv patches/series.bak patches/series + + filechk_ikpatchsetgz = (echo "static const char kernel_patchset_data[] __used = MAGIC_START"; cat $< | scripts/bin2c; echo "MAGIC_END;") +targets += patchset_data.h +$(obj)/patchset_data.h: $(obj)/patchset_data.gz FORCE + $(call filechk,ikpatchsetgz) + $(obj)/kheaders.o: $(obj)/kheaders_data.tar.xz quiet_cmd_genikh = CHK $(obj)/kheaders_data.tar.xz Index: linux-5.10.59-rt51/kernel/patchset.c =================================================================== --- /dev/null +++ linux-5.10.59-rt51/kernel/patchset.c @@ -0,0 +1,100 @@ +/* + * kernel/patchset.c + * Save the current patchset in the kernel + * + * Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org> + * + * Based on kernel/configs.c. Credits go to + * - Khalid Aziz <khalid_aziz@hp.com> + * - Randy Dunlap <rdunlap@xenotime.net> + * - Al Stone <ahs3@fc.hp.com> + * - Hewlett-Packard Company + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/uaccess.h> + +/**************************************************/ +/* the patchset used to create the current kernel */ + +/* + * Define kernel_patchset_data and kernel_patchset_data_size. It contains the + * wrapped and compressed patchset. The patchset is first compressed with + * gzip and then bounded by two eight byte magic numbers to allow extraction + * from a binary kernel image: + * + * IKPAQ_ST + * <image> + * IKPAQ_ED + */ +#define MAGIC_START "IKPAQ_ST" +#define MAGIC_END "IKPAQ_ED" +#include "patchset_data.h" + +#define MAGIC_SIZE (sizeof(MAGIC_START) - 1) +#define kernel_patchset_data_size \ + (sizeof(kernel_patchset_data) - 1 - MAGIC_SIZE * 2) + +#ifdef CONFIG_IKPATCHSET_PROC + +static ssize_t +ikpatchset_read_current(struct file *file, char __user *buf, + size_t len, loff_t *offset) +{ + return simple_read_from_buffer(buf, len, offset, + kernel_patchset_data + MAGIC_SIZE, + kernel_patchset_data_size); +} + +static const struct proc_ops ikpatchset_file_ops = { + .proc_read = ikpatchset_read_current, + .proc_lseek = default_llseek, +}; + +static int __init ikpatchset_init(void) +{ + struct proc_dir_entry *entry; + + /* create the patchset file entry */ + entry = proc_create("patchset.tar.gz", S_IFREG | S_IRUGO, NULL, + &ikpatchset_file_ops); + if (!entry) + return -ENOMEM; + + proc_set_size(entry, kernel_patchset_data_size); + + return 0; +} + +static void __exit ikpatchset_cleanup(void) +{ + remove_proc_entry("patchset.tar.gz", NULL); +} + +module_init(ikpatchset_init); +module_exit(ikpatchset_cleanup); + +#endif /* CONFIG_IKPATCHSET_PROC */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Carsten Emde"); +MODULE_DESCRIPTION("Save the current patchset in the kernel"); Index: linux-5.10.59-rt51/scripts/extract-ikpatchset =================================================================== --- /dev/null +++ linux-5.10.59-rt51/scripts/extract-ikpatchset @@ -0,0 +1,68 @@ +#!/bin/sh +# ---------------------------------------------------------------------- +# extract-ikpatchset - Extract the patchset file from a kernel image +# +# This will only work when the kernel was compiled with CONFIG_IKPATCHSET. +# +# The obscure use of the "tr" filter is to work around older versions of +# "grep" that report the byte offset of the line instead of the pattern. +# +# (c) 2009,2010 Dick Streefland <dick@streefland.net> +# (c) 2013 Carsten Emde <C.Emde@osadl.org> copied from extract-ikconfig +# Licensed under the terms of the GNU General Public License. +# ---------------------------------------------------------------------- + +cf1='IKPAQ_ST\037\213\010' +cf2='0123456789' + +dump_patchset() +{ + if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"` + then + pos=${pos%%:*} + mkdir -p extracted-patchset + tail -c+$(($pos+8)) "$1" | tar zxv -C extracted-patchset 2> /dev/null + if [ $? != 1 ] + then # exit status must be 0 or 2 (trailing garbage warning) + exit 0 + fi + fi +} + +try_decompress() +{ + for pos in `tr "$1\n$2" "\n$2=" < "$img" | grep -abo "^$2"` + do + pos=${pos%%:*} + tail -c+$pos "$img" | $3 > $tmp2 2> /dev/null + dump_patchset $tmp2 + done +} + +# Check invocation: +me=${0##*/} +img=$1 +if [ $# -ne 1 -o ! -s "$img" ] +then + echo "Usage: $me <kernel-image>" >&2 + exit 2 +fi + +# Prepare temp files: +tmp1=/tmp/ikpatchset$$.1 +tmp2=/tmp/ikpatchset$$.2 +trap "rm -f $tmp1 $tmp2" 0 + +# Initial attempt for uncompressed images or objects: +dump_patchset "$img" + +# That didn't work, so retry after decompression. +try_decompress '\037\213\010' xy gunzip +try_decompress '\3757zXZ\000' abcde unxz +try_decompress 'BZh' xy bunzip2 +try_decompress '\135\0\0\0' xxx unlzma +try_decompress '\211\114\132' xy 'lzop -d' + +# Bail out: +echo "$me: Cannot find kernel patchset." >&2 +exit 1